### DESCRIPTIONThis is a versatile usb device. It has an AVR AT90USB162 microcontroller and an ESP8266 ESP-12 module, both of them connected by serial bus. You can program each one individually to ach...
Make Your Design a Reality.
Switching power supply, 220 V input, adjustable output 1 volts - 17 volts, maximum current 10 Amps. The microcontroller STM32F030C8T6.
We are going to improve the electronics in our car, with live telemetry and better ECU controls!
Switching power supply 450W - SG3525 \ Импульсный источник блок питания - Share Project - PCBWay
The amplifier is made according to the classic three-stage architecture scheme. The amplifier is easy to build and configure.
RD15HVF1
The amplifier uses 2 MOSFET transistors for the final and uses LPF with a 22uH core. For the power supply, you can use a power supply with a voltage of 50V - 90VDC with a current of at least 10Ampere....
The Jeffrey 2.0 PCB for the iSpindel. Please head over to www.OpenSourceDistilling.com/iSpindel for an in depth description, parts list, instructions, and video tutorials. The Jeffrey 2.0 incorporates...
Con esta tarjeta podrás invertir el sentido de giro y variar la velocidad de un motor DC
Necessary tools:Arduino (or any other device capable of programming an ATmega328)soldering iron (preferably with temperature control)fine solder (not bigger than 0.5mm in diameter)flux penmultimeterfi...
Technology is becoming more complex every day. Devices get smaller, integration gets higher. Consequently, it is becoming increasingly harder to understand how modern devices work.In the 80s, you coul...
The heart of the circuit consists of the integrated MCP2221A produced by Microchip . This integrated is cataloged as USB 2.0 to I2C / UART Protocol Converter with GPIO or a protocol converter from ...
DAPLINK and STM32 minimum system combination, one data cable can complete the download and debugging of the program
DC-DC SMPS FROM TARSUS/TURKEYDESING BY TB5CVN
Here is the latest version of the Sinclair Scientific Calculator emulator running on a custom PCB which accurately replicates the size and the circuitry of the original calculator. This is powered by ...
The Backplane-4 is part of the SBC-85 system to expand from the basic 8085 CPU card to accessory I/O, memory, etc.
Nixie Tube ThermometerRetro temperature displayNixie Tube ThermometerIn this article we describe the union of a modern microcontroller with a classic display technology to create a novel temperature i...
Verbesserte Version der genialen Ampel. Verbesserte Fu?form damit die Krokoklemmen besser halten sowie symmetrischere Ampelumrandung.Mehr dazu hier: https://www.pcbway.com/project/shareproject/Calliop...
KeyBoh is an Arduino Leonardo shield having 20 buttons, one analog thumbstick (+button) and one rotary encoder (+button), so you've a total of 22 buttons, a joystick and an encoder.You can use the sta...
