Shop Selection of hand designed prints for your Home. by AttikiStudio located in London, United Kingdom. Smooth shipping! Has a history of shipping on time with tracking. Speedy replies! Has a history of replying to messages quickly. Rave reviews! Average review rating is 4.8 or higher
Daydreaming in geometry class a lifetime ago, I realized the "3 points define a circle" principle could be used equally to measure an arc
Complex mechanisms make impressive 3D prints. Read on for the best examples of a 3D printed rack and pinion, iris box, worm gears, and more!
So! here we are again..After a lot of time, some war and downtime here I am again thinking how to make my workspace a little bit more organized.The Filament Swatch Display by @Brad - FTBT 3D I thought to myself how can I mount this wonderful piece of art on my Ikea Skadis pegboard..After some design and a lot of testing I came out with this 2 part Dock/Shelf or whatever you wanna call it.As it described this is a mount for the Filament Swatch Display.The printing is very simple with a little support on the mount itself.For this small printing project you'll need a few things:1. X2 M4 10-14mm Screws2. X2 M4 inserts3. Soldering iron4. Some patience hahaThe assembly is very simple:1. Insert the inserts with the soldring iron to the dedicated holes in the Skadis mount (Like in the photo)2. Thread the 2 M4 screws through the Dock holes and tight them with a the allen key to the mount (Like in the photos)3. Mount this Dock to the Skadis pegboard and enjoy the free space on your desk! (Like in the photo)4. That's it! You have an awesome mount for your Filament Swatch Display (Like in the photo)BTW,I printed the Filament Swatch Display and this dock with Bambu Lab Black Charcoal PLA and Bambu Lab Matte Grey filament.
This is a remodeled version of Apex23's top mounting shelf, specifically designed for boards mounted with 10mm spacers, such as the IKEA Skadis Wall Mount by AU3D, Standoff / Spacers for IKEA Skadis by AU3D. Each board size (76x56cm, 56x56cm, and 36x56cm) has its corresponding shelf size to ensure a perfect edge-to-edge fit. Additionally, an extra profile is provided to fit the limited space on A1 Mini machines.Printing instructionsThis 3D model is designed for printing without the need for supports. For optimal results, position the model upside down, ensuring that the print bed is both clean and has adequate adhesion to prevent warping. Based on my experience of successfully printing approximately twelve of these shelves, I can confirm consistently flawless prints without the necessity for any specialized settings if the build plate is properly cleaned.Skadis CollectionI am constantly developing more IKEA Skadis attachments. Check out myIKEA Skadis Shelves, Trays and Container CollectionGeneral IKEA Skadis CollectionIKEA SKADIS Boards Collection
Storage box for IKEA SkadisHeight: 64mmwidth: 52mmDepth: 110mmNo support needed--------------------------------------------------------------------------------------------------------- If you enjoy my work and would like to support me, or if you're interested in selling physical products of my designs, please check out my Patreon---------------------------------------------------------------------------------------------------------
More Sci-Fi version of the Vespa Scooter
This is a mount for the 3D Printed Articulating LED Lamp onto an IKEA SKÅDIS board with the universal hook from IKEA SKADIS Collection (easy pri
This cutter design makes 2 cutters ( one .5 in stud cutter and one 1.2 inch cutter) these are meant for making flowers with 2 colors of petals. To cre
Episode 1 of a 8 part instructional series from www.goldenarmor.com How to create custom curved and bent parts inside of TINKERCAD. This video series (12 vi...
Simple spice rack for better kitchen organization. Each section holds four spice jars and is wall mountable with 2 #4 drywall screws. Designed around these spice jars from Amazon: https://tinyurl.com/3pxj2bukOnShape link if you want to make derivative works: https://tinyurl.com/3u5r2jee
SKÅDIS Parametric Bin and Shelve DesignerBoost MeIf you found this model useful, please consider leaving a Boost, thanks!OverviewThis OpenSCAD script enables you to design customizable storage bins with integrated hooks specifically for the IKEA SKÅDIS pegboard system. The model includes parameters for dimensions, compartments, wall thickness, and hooks, allowing full customization to meet various storage needs. The script generates a 3D model that is ready for printing.FeaturesCustomizable Compartments: Modify horizontal and vertical divisions for organized storage.Rounded or Flat Base: Choose between rounded or flat base designs.Frontal Access: Set a customizable frontal drop for easier access to bin contents.Integrated Hooks: Hooks automatically adjust based on bin dimensions and the SKÅDIS hole spacing.Parametric Design: Modify the compartments in the script for personalized setupsParametersCompartmentshorizontal_compartments: Array defining horizontal divisions. Each value represents the relative size of the compartment (e.g., [0.5, 0.5] for two equal compartments).vertical_compartments: Array defining vertical divisions. Same structure as horizontal_compartments.Note: To modify the compartment layout, edit the horizontal_compartments and vertical_compartments arrays directly in the script on lines 11–12.Thicknesswall_thickness: Thickness of the bin walls (default: 3 mm, divided evenly between sides).Rounded Cornerscorner_radius: Radius for rounded corners of the bin (default: 5 mm).Note:The corner_radius ensures smooth, rounded edges for a professional finish.The value of corner_radius must not be equal to or larger than any of the bin dimensions (bin_width, bin_height, or bin_depth), as this will cause modeling errors.For a standard "sharper" corner, set this value to a very low number (e.g., 0.5 mm).Frontal Dropfrontal_drop: Percentage of the bin height to remove for frontal access (default: 0.2 or 20%).Base Typerounded_base: Boolean parameter to set the base type:true: Rounded base.false: Flat base (default).SKÅDIS Hole Spacinghole_spacing: Distance between SKÅDIS holes (default: 40 mm).Important Note: The value of hole_spacing should not be modified if you are using the standard IKEA SKÅDIS board, as this will cause misalignment errors.Hook Parametershook_body_length: Length of the hook body (default: 30 mm).hook_thickness: Thickness of the hook (default: 4.3 mm).hook_outer_radius: Radius of the hook's curved section (default: 4.7 mm).hook_bend_angle: Angle of the hook's bend (default: 167.4°).hook_tip_length: Length of the hook's tip (default: 4.5 mm).inferior_hook_length: Length of the lower hook support (default: 2 mm).inferior_support_offset: Offset for inferior support (default: 26.513 mm).Important Note: Do not modify the hook parameters unless absolutely necessary, as changes can result in hooks that are incompatible with the SKÅDIS system.How to UseEdit Compartments:Open the script in the BambuLab server.To define custom compartments, update the horizontal_compartments and vertical_compartments arrays on lines 11–12. Ensure that the sum of all elements in each array equals 1 (e.g., [0.5, 0.5] or [0.4, 0.3, 0.3]).Save and Generate:Save the modified script in the BambuLab server.The server will automatically render the updated model.3D Print:Use the rendered model to start your print.RecommendationsHook Infill:Use 100% infill for the hooks to ensure maximum strength and durability.Supports:Enable tree supports in your slicer to properly print overhangs and curved sections.OutputThe generated bin includes:Fully parametric dimensions.Optional compartments for storage organization.Integrated hooks aligned with SKÅDIS pegboard holes.Smooth corners for a professional finish.Enjoy designing and creating your custom SKÅDIS bins and shelves!If you like this model, buy me a coffee! https://buymeacoffee.com/juangonzale
A pretty big soccer/football ball cookie cutter.Diameter: 10 cm.
NOT MY DESIGN(From original)His name is Mr. FIL and he is one of the co-workers of kumamoto. He is a mammoth fond of chess, so he usually stays up at
fiber artist specializing in nature inspired art quilts, handmade books, and collages, utilizing eco printing, natural dyes, and other sustainable production methods.
Download millions of 3D models and files for your 3D printer, laser cutter, or CNC. From custom parts to unique designs, you can find them on Thingive
Boost MeThanks for your support!IKEA Skadis Pen HolderMy daughter has a new pen set, this holder makes her very happy with. Why not to share here with everyone. Print in place, no support is needed. Hole sizes are 12mm each. The default twist clip works with:Original IKEA Skadis pegboard in BLACK or WHITE colorMy Skadis pegboard system: https://makerworld.com/en/models/751197#profileId-684931 Please select “twist clip for wood color”, if you have the original board in WOOD color, which is 0.49mm thiner than the black or white one. I used the clips from @LineArcLine on printables, thank you!Enjoy your print!
IKEA Skadis | Collection - MakerWorld
Take your mind off of the holiday stress with these funny posts that have nothing to do with the holidays. Season's meme-ings, everyone!
