This Scan N Cut Guide For Beginners tutorial is a great way to get you started with your Brother Scan N Cut cutting machine.
We've been creating Brother ScanNCut tutorials for quite a few years now, so we thought it was time to put them altogether on one page so it's easy for you to find them. There are close to 50 tutorials on the page at the moment, and more will be added as we do them. We have how-to videos, tips, hints, and You might also be interested in our premium ScanNCut training. We have 4 courses for the absolute beginner through to the more advanced user. And we have both paper and fabric ScanNCut courses. You can check them out here
This Scan N Cut Guide For Beginners tutorial is a great way to get you started with your Brother Scan N Cut cutting machine.
Welding text on your Brother ScanNCut is really handy when you want to add names and messages to your projects. Watch the video or see the full written instructions below. Here is how to do it: Turn on your machine and Select 'Pattern' Select Fonts icon 'Aa' Select the font you wish to use. Some fonts will weld better than others. To weld text you need to add one letter at a time. If you add a whole word you will not be able to weld the text. Type the first letter of your word. Press OK. Select Set. Your letter now shows
Welding text on your Brother ScanNCut is really handy when you want to add names and messages to your projects. Watch the video or see the full written instructions below. Here is how to do it: Turn on your machine and Select 'Pattern' Select Fonts icon 'Aa' Select the font you wish to use. Some fonts will weld better than others. To weld text you need to add one letter at a time. If you add a whole word you will not be able to weld the text. Type the first letter of your word. Press OK. Select Set. Your letter now shows
This tutorial will guide you step by step on how to use the built-in Scan N Cut designs. These can be a great starting point for your projects.
We've been using our ScanNCut machines for a number of years now and we have a lot of mats all in varying stages of stickiness. Hey, it's part and parcel of owning a ScanNCut. Honestly, though, I figure that I am already saving money since I don't have to pay for additional dies with this machine. So buying a new mat every now and then doesn't phase me. Even so, we like to find ways to extend the life of the mat and as a result, we are yet to throw any away. We still have the original we got
We recently purchased a Brother Scan n Cut Universal Pen Holder and promptly set about testing a number of different pens to see what worked and what didn't. I have to admit, that initially, I was doubtful that very many of the pens we have on hand would actually work with it. Well, we were pleasantly surprised because we found that a number of our pens not only worked but they worked extremely well. So with this in mind, we decided to write up a blog post so that our readers who either own the universal pen holder or are thinking of
Julie Fei-Fan Balzer, crafting expert and educator, is a paid consultant of Brother ScanNCut USA. Have you ever been confused by which file types the ScanNCut machine can cut? I made this handy dandy
Yesterday I introduced you to just a few of the many wonderful features on…
Come and look around with easy access to lots of Brother scan n cut tutorials, projects and much more. Browse at leisure and enjoy.
We've been creating Brother ScanNCut tutorials for quite a few years now, so we thought it was time to put them altogether on one page so it's easy for you to find them. There are close to 50 tutorials on the page at the moment, and more will be added as we do them. We have how-to videos, tips, hints, and loads of projects. You might also be interested in our premium ScanNCut training. We have 4 courses for the absolute beginner through to the more advanced user. And we have both paper and fabric ScanNCut courses. You can check
Learn how to import SVG files to Brother CanvasWorkspace and convert them to FCM format to cut with your ScanNCut machine.
Are you slightly intimidated or "scared" of your Scan N Cut? This tutorial will help you and give you some solid tips to get you started.
Smiljan Radic - Wood house, Colico Lake 2015. The stilt like structure is designed around the length of un-cut construction lumber, lifting the house above the forest to views of the lake. Scans via,...
How many times have you been looking for a pretty card for that special friend or family member and just can't seem to find the right one? Well we have a number of card and envelope templates available in our store that are sure to help you out. But here is one that is sure to get that WOW response and we have provided a free tutorial to show you how to create it using ScanNCut Canvas. There are a lot of videos on YouTube on how to make these types of cards, but we have gone one step further and
Layered paper diorama capturing a blustery early fall day at Multnomah falls in Oregon's Columbia Gorge. The original painting was hand painted using gouache paint on Legion watercolor paper, scanned, then printed as an archival giclee reproduction. I then cut and embellished the reproduction and assembled this layered diorama in a wooden box to capture a little snippet of magical adventures for your home. The box is flat on the back and intended to sit on a shelf, it is not prepared to be hung on a wall. (c) Lizzy Gass 2022-3 All rights remain with artist.
Disclaimer: We are not affiliated with Brother in any way, so the opinions in this post are our own. We may link to products that we use and review in this post and If you click a link and make a purchase using those links, we receive a small commission at no extra cost to you. The ScanNCut Print to Cut Activation Card (for DX machines only) has been out for a while now but to be honest, we didn't rush out and buy it. It was only because we were getting a number of emails from our readers who
Sewing doll clothes for American Doll and or 18 inch dolls. Plans for tutorials on sewing, crafts, and Serger in my blog.
Based in Santa Catarina, Brazil, collage artist Marcelo Monreal's work is going viral for his different take on inner beauty. His latest works cut open the portraits of celebrities in Photoshop, super models and other faces of pop culture that are otherwise stagnant, to reveal beautiful blooms underneath. Monreal's use of floral motifs stems (no pun intended) from his first job as an artist, developing embroidery for a label factory. His imagery is in a similar vein to that of the spliced vintage photographs of Matthieu Bourel, covered here, and Rocío Montoya's manipulated, experimental photos. While his subjects are uniquely contemporary, Monreal shares the same sense of bizarre humor that combines the morbid with abstracted glamour.
We love the Brother ScanNCut machines here at CB HQ! They provide us with endless possibilities for our crafty projects and allow us to expand our imaginations and create makes that we could only dream of before! From fabric to paper, there’s so much that this nifty gadget can do. It has truly revolutionised the art of papercutting. There’s no more painstaking work with a scalpel and cutting mat - now you can draw out intricate designs, then scan and cut it within minutes. Plus, you can cut out hundreds more, all exactly the same! To celebrate this exceptional machine, we’ve rounded up our favourite projects. Take a look and be inspired…
to spotlight the beauty and bounty of seasonal produce throughout the year, henry hargreaves and caitlin levin have formed a series of 'food scans'.
Canvas Workspace Cheat Sheets in adorable colors. They include sheets for both the online and the downloaded versions of Canvas Workspace.
Working with ink, paper, leaves, scissors, and other materials, Atlanta-based graphic designer Matthias Brown (previously) loves to experiment with rotoscoping and other traced animations that he shares on his Tumblr, Traceloops. Each animation is physically drawn, cut, carved and scanned frame-by-frame to create what you see here. Brown has also lent his design sense to a host of brands including Tate Modern, Converse, MTV and others, and you can get lost in more of his trippy animations here. More
John Stezaker is a British conceptual artist born in 1949. For the past fifty years, Stezaker has been making some of the most arresting and disturbing collages from found photographs, postcards, book plates, and magazines. A graduate of Fine Art from the Slade School of Art, London, Stezaker reacted against the trend for bright, … Continue reading "Face Values: The Surreal and Disturbing Collage Portraits of John Stezaker"
Gorgeous Brazilian Contemporary Sustainable Bracelet made of recycled, synthetic and natural rubber. The references are: art history, street fashion, design and forms of nature. After several studies (from the Brazilian designers Lina Menna Barreto and Mauro Fuke), the design goes through a scanning process.The rubber is laser cut with extreme precision. In humorous style, Design Tun values the originality, authenticity and personal growth. The jewellery are unisex and there's no age limit. Lightweight, trendy, super resistant, durable and waterproof, you can wear in the pool, in the shower and in the sea. It will come with a description as how you should take care of your Tun. *It may not be suitable for those who have allergy to latex* Don't hesitate to contact me if you have any question. Thanks for shopping by Karla Saraiva's shop and don't forget to check the other items! 😊
Get ready to cook a perfect medium-rare steak without breaking a sweat. Sous vide is your secret weapon to impressing even the biggest steak snobs. No more babysitting your steak and crossing your fingers - with sous vide, you can truly set it and forget it. This recipe is meant to be a general guide to achieving medium-rare sous vide steak. I have recipes for specific cuts if you want to get into the nitty gritty! Make sure to scan the notes below for extra tips to help you nail it.
Camera Tutorial Manual Template for Camera Bellows (each piece should measure 12″ x 4′) SVG Cutting File for Camera Bellows Hello, This project has already been posted on the Pion Design blog her
Come and look around with easy access to lots of Brother scan n cut tutorials, projects and much more. Browse at leisure and enjoy.
Based in Santa Catarina, Brazil, collage artist Marcelo Monreal's work is going viral for his different take on inner beauty. His latest works cut open the portraits of celebrities in Photoshop, super models and other faces of pop culture that are otherwise stagnant, to reveal beautiful blooms underneath. Monreal's use of floral motifs stems (no pun intended) from his first job as an artist, developing embroidery for a label factory. His imagery is in a similar vein to that of the spliced vintage photographs of Matthieu Bourel, covered here, and Rocío Montoya's manipulated, experimental photos. While his subjects are uniquely contemporary, Monreal shares the same sense of bizarre humor that combines the morbid with abstracted glamour.
Had To Leave The Function Got Overstimulated SVG digital artwork for instant download and suitable for cutting software like Cricut Design Space, Silhouette Studio,... and other design software like Illustrator, CorelDraw & more. » Digital file artwork for DIY projects
