We can guarantee you’ve never seen a waterslide like this.

Waterslide Ceramic Decal Serie: Adam and Eve Size: 10x10cm (3.94 x 3.94 inch) Firing temperature: 760-850 ºC (1400-1562 ºF) This decal can be applied to, or used in combination with, ceramics, pottery, ceramic tiles, glass, fused glass, stained glass and mosaics. It can be overglazed (after firing), fused on top or in between layers of glass, painted with vitreous paints and/or enamels. For best result when used with glass, use a white opalescent glass, like Spectrum 200S or 200SF for fusing. Stained Glass Elements is a professional glass studio with over 30 years experience. Specialized in stained glass, glass painting, screen printing on glass, glass fusing , glass-etching and restoration . From small suncatchers to large stained glass windows . Custom orders are welcome! Ask for the possibilities. For stained glass artists, glass studios, tiffany crafters we offer a variety of semi-finished products such as kiln-fired glass paintings , ornaments on glass, glass patterns, motifs on glass. Ready to be implemented in your glass and/or Tiffany work. A glass painting or ornament is an eye-catcher and provides a work of art a unique look. Experience with manydifferent styles including : Art Nouveau ( Jugendstil ), Art Deco, Neo-Gothic, Victorian, Arts & Crafts, Prairie School, Amsterdam School, Abstract, Pop Surrealism. Adam and Eve ceramic decal waterslide transfer for ceramics tiles glassfusing enameling beads and mosaic firing temperature 1400-1562 ºF

Choose from 6 different sizes. 3" 4" 5" 6" 7" 8" Full Sheet: 3" H (6 pcs) 4" H (4 pcs) Our Waterslide decals are commercially printed and cover coated by us and are ready to use. The background is clear. Waterslide decals are meant to be used on light color substrates. Our Waterslide decals are ready to use. Instructions: 1. Make sure the application surface is clean and free of oil. 2. Cut out decal and leave about 1/4" - 1/2" around edge. 3. Store the remaining decals in the plastic envelope. 4. Wet the decal in a small out of water. Leave in water about 15 seconds. Then lay flat and let sit for another minute or two. 5. When the decal will slide off the paper, wet the substrate with water and place the decal (with backing) on the piece. Gently slide white backing from the decal. 6. Place the decal in position. 7. Gently squeegee the decal going from the inside of the decal to the outside. 8. Carefully dab or wipe all water from the top of the decal and around the decal. 9. Dry piece. Make sure the decal is completely dry. 10. Seal with a clear coating of your choice. First spray should be very light. Then the next spray should be heavier.

Waterslide Ceramic Decal Rococo: Boucher - The Secret Letter Size: 10x10cm (3.94 x 3.94 inch) Firing temperature: 760-850 ºC (1400-1562 ºF) This decal can be applied to, or used in combination with, ceramics, pottery, ceramic tiles, glass, fused glass, stained glass and mosaics. It can be overglazed (after firing), fused on top or in between layers of glass, painted with vitreous paints and/or enamels. For best result when used with glass, use a white opalescent glass, like Spectrum 200S or 200SF for fusing. Stained Glass Elements is a professional glass studio with over 30 years experience. Specialized in stained glass, glass painting, screen printing on glass, glass fusing , glass-etching and restoration . From small suncatchers to large stained glass windows . Custom orders are welcome! Ask for the possibilities. For stained glass artists, glass studios, tiffany crafters we offer a variety of semi-finished products such as kiln-fired glass paintings , ornaments on glass, glass patterns, motifs on glass. Ready to be implemented in your glass and/or Tiffany work. A glass painting or ornament is an eye-catcher and provides a work of art a unique look. Experience with manydifferent styles including : Art Nouveau ( Jugendstil ), Art Deco, Neo-Gothic, Victorian, Arts & Crafts, Prairie School, Amsterdam School, Abstract, Pop Surrealism. Rococo ceramic decal girl reading secret Letter waterslide transfer for ceramics tiles glass fusing enameling beads firing at 1400-1562 ºF

Asthma/Inhaler SVG, PNG, Sublimation, digital download, cricut, silhouette, waterslide, print and cut

Thanks to the brains of a photographer with imagination, the worlds of Miniature Calender are magical - but they're all using props we see every day

Our Waterslide ceramic decals are commercially printed and cover coated by us and are made for easy application and firing. Whether you choose Ceramic or Glass Decals, they are LEAD FREE and FOOD SAFE. You can use them on a plate or bottom of a bowl giving you more options than many of our competitors that cannot offer the same type of decal. Our waterslide ceramic are permanent and will not scratch or rub off once fired. There are 3 variations available for this design, available in Ceramic or Glass Decal applications. Choose from these Ceramic and Glass Decal sheet options: Small 4" x 5" Medium 7" x 9" Large 10" x 16" Our Waterslide ceramic decals are commercially printed and cover coated by us and are made for easy application and firing. Whether you choose Ceramic or Glass Decals, they are LEAD-FREE and FOOD SAFE. You can use them on a plate or bottom of a bowl giving you more options than many of our competitors that cannot offer the same type of decal. Our waterslide ceramic decals are permanent and will not scratch or rub off once fired. Choose if you are using Ceramic or Glass. If you choose Ceramic there will be a clear cover coat that will burn off entirely in the firing. You should fire these: Firing temperatures: 1436 F - 1508 F Cone 015-016 NO hold.. fast firing If you choose Glass there will be a flux cover coat that will leave a faint line where you cut out the decal. You should fire these: Firing temperature: 1050 F - 1200 F Cone 022-020 NO hold... fast firing. These are NOT sepia decals. The colors are rich including black. Waterslide ceramic or glass decals are easy to use. Once kiln fired, they are permanent and will not scratch or rub off. Directions for use: Waterslide ceramic decals are commercially printed and cover coated for easy application and firing. Cut out the decal, soak in lukewarm water, slide the decal off the paper onto your piece. Squeegee the water out and allow it to dry overnight. Then fire (see temperatures above). SUPER DISCOUNT SCHEDULE! We now have tiered discounts on open stock decals. Please apply the coupon code in the shopping cart. Purchase $100.00 save 10%: Use Code: Express10 Purchase $200.00 save 15%: Use Code: Express15 Purchase $300.00 save 20%: Use Code: Express20 Purchase $500.00 or more save 25%: Use Code: Express25 We also do custom printing. Please contact us for further information. SHIPPING POLICIES:  Decals ship in 3-5 business days. Package shipped 1st Class Mail with Tracking unless upgrade selected.

Choose from 6 different sizes. 3" 4" 5" 6" 7" 8" Full Sheet: 3" H (6 pcs) 4" H (4 pcs) Our Waterslide decals are commercially printed and cover coated by us and are ready to use. The background is clear. Waterslide decals are meant to be used on light color substrates. Our Waterslide decals are ready to use. Instructions: 1. Make sure the application surface is clean and free of oil. 2. Cut out decal and leave about 1/4" - 1/2" around edge. 3. Store the remaining decals in the plastic envelope. 4. Wet the decal in a small out of water. Leave in water about 15 seconds. Then lay flat and let sit for another minute or two. 5. When the decal will slide off the paper, wet the substrate with water and place the decal (with backing) on the piece. Gently slide white backing from the decal. 6. Place the decal in position. 7. Gently squeegee the decal going from the inside of the decal to the outside. 8. Carefully dab or wipe all water from the top of the decal and around the decal. 9. Dry piece. Make sure the decal is completely dry. 10. Seal with a clear coating of your choice. First spray should be very light. Then the next spray should be heavier.

Thanks, Yvonne ! [Ichikawa Botanical & Zoological Garden, Chiba, Japan]

Waterslide Ceramic Decal Serie Rousseau: Jaguar Attack Size: 10x10cm (3.94 x 3.94 inch) Firing temperature: 760-850 ºC (1400-1562 ºF) This decal can be applied to, or used in combination with, ceramics, pottery, ceramic tiles, glass, fused glass, stained glass and mosaics. It can be overglazed (after firing), fused on top or in between layers of glass, painted with vitreous paints and/or enamels. For best result when used with glass, use a white opalescent glass, like Spectrum 200S or 200SF for fusing. Stained Glass Elements is a professional glass studio with over 30 years experience. Specialized in stained glass, glass painting, screen printing on glass, glass fusing , glass-etching and restoration . From small suncatchers to large stained glass windows . Custom orders are welcome! Ask for the possibilities. For stained glass artists, glass studios, tiffany crafters we offer a variety of semi-finished products such as kiln-fired glass paintings , ornaments on glass, glass patterns, motifs on glass. Ready to be implemented in your glass and/or Tiffany work. A glass painting or ornament is an eye-catcher and provides a work of art a unique look. Experience with manydifferent styles including : Art Nouveau ( Jugendstil ), Art Deco, Neo-Gothic, Victorian, Arts & Crafts, Prairie School, Amsterdam School, Abstract, Pop Surrealism. Henri Rousseau Ceramic decal jaguar attack waterslide transfer for ceramics tiles glassfusing enameling firing temperature 1400-1562 ºF

Beautiful Vintage Decal Name ~ Jester IMPORTANT NOTICE!!! PLEASE READ FULL DESCRIPTION BELOW!!! THESE ARE NOT RUB ON DECALS OR STICKERS! BUT ONCE YOU GET THE HANG OF THESE WATER SLIDE DECALS YOU WILL LOVE THEM ☺ You will receive a clear waterslide decal sheet of the size you select from the drop down menu and instruction sheet how to apply. These clear waterslide decals work best on a lighter flat background as they are clear. On darker background you will find it difficult to see the image. This decal you are purchasing are as shown in the main first image. All other images are examples of work and application. The measurements are approx. depending on the style of decal purchased. You are ordering the sheet size that the decal is printed on not the size of the decal so there is usually a small space around the edge. Please contact us if you need help as we cannot be responsible for the size you choose if you are not happy. If you have any problems with your decal please do not hesitate to contact us before leaving feedback so we can help you. Water slide decals work the same way as nail decals (these are not stickers). They can be applied to any smooth surface, furniture, boxes, mirrors, candles, soaps, jars, mugs etc. Application process: Cut close to image with scissors. Dip in warm water (not hot). The paper will roll, soak for approx. 30 seconds. When the film starts to loosen from the paper (do NOT remove from backing), place the paper on the substrate to be decorated and then slide the paper from under the decal. Work out any air bubbles with a decal squeegee & let dry. It is important to remove all water and air. Seal after with water based varnish when dry. These can also be kilned on ceramics. Please purchase for all your transfer needs: wood, furniture, glass, ceramic, plastic and anything hard and flat :) This decal you are purchasing are as shown in the main image. This decal is available in A4, A5, A6, and A7. Millimetres and inches A4 = 210 x 297 mm or 8.3 x 11.7" A5 = 148 x 210 mm or 5.8 x 8.3" A6 = 105 x 148 mm or 4.1 x 5.8" A7 = 74 x 105 mm or 2.9 x 4.1" In this listing there is also an option to purchase a “squeegee decal application tool”. Squeegee decal applicator is an essential for applying your beautiful decals. Please see my other listings...new decals are always being added. You can transform anything in to unique shabby chic gems. WE ARE IN THE UK. ANYTHING GOING ABROAD DEPENDING ON WHERE YOU ARE CAN TAKE ANYWHERE BETWEEN 1-4 WEEKS. PLEASE BE PATIENT WITH UK SNAIL MAIL. THANK YOU ☺

"OMG! I have water in my ears!"

CLEAR CAST DECALS:  Image will be transparent and may not be ideal for darker backgrounds.   WHITE OPAQUE LAYER DECALS: These will have an opaque white layer behind the design. This makes the design pop and can be put on any unsanded, smooth surface.     DECAL DETAILS: Our decals are printed on quality, semi-permanent vinyl and brand name ink.  Our decals are not waterslides. Waterslides are printed on material that allows the surface background to be seen. Olive decals are printed on transparent vinyl. Since the decals have a transparent border there is possibility of seeing the sanding marks under the transparent areas of the decal. Be sure to place the decals on a smooth surface. Other than that, our decals act as stickers. While they are very easy to work with, be careful with placement as they are difficult to peel and restick once applied to a surface.    To be considered:  All of the representation of printed decal images are digital mockups. You may be able to find real life examples on our social media. We make every effort to present the true color of the product. However, color may vary depending on the material, camera used, and/or the device used to view the product.  The buyer assumes responsibility for the product once purchased. Please complete your due diligence to ensure this item will suit your needs properly.   There are no refund or exchanges on decals once the order is shipped and received in good condition. If there are issues with the condition of your item(s) once they have arrived please contact us at [email protected]. You should also start your claim with Route if you opted for this insurance during checking out.

"Out of my way! Let me get back up there!"

Our Waterslide Ceramic Decals are commercially printed and cover coated by us and are made for easy application and firing. The Decals are LEAD-FREE and FOOD SAFE. You can use them on plates or a bottom of bowls. Giving you more options than our competitors that cannot offer the same type of Decal. Our Waterslide Ceramic Decals are permanent and WILL NOT scratch or rub off once fired. The Decals will have a clear cover coat that will burn off entirely during the firing process. These are NOT Sepia Decals. These are NOT stickers. The colors are rich, including black. Our Waterslide Ceramic Decals are easy to use. Once kiln fired, they're permanent and WILL NOT scratch or rub off. FIRE GUIDELINES: Firing temperatures: 1436° - 1508° F - Cone 015-016 - NO hold - Fast Firing DIRECTION FOR USE: Cut out the Decal, soak in lukewarm water, slide the decal off the paper onto your piece. Squeegee the water out and allow it to dry overnight. Once dry, fire (see temperatures above). SUPER DISCOUNT SCHEDULE! We have a tiered discount available on open stock decals. Please apply the coupon code in the shopping cart. Purchase $100.00 save 10%: Use Code: SAVE10 Purchase $200.00 save 15%: Use Code: SAVE15 Purchase $300.00 save 20%: Use Code: SAVE20 Purchase $500.00 or more save 25%: Use Code: SAVE25 We also do custom printing. Please contact us for further information. Sorry, NO REFUNDS after 30 days from purchase.

𝗫𝗽𝗿𝗲𝘀𝘀𝗶𝗼𝗻 𝗗𝗲𝗰𝗮𝗹𝘀 specializes in printing ceramic and glass overglaze decals. Once kiln-fired, these decals become permanent, ensuring they won't scratch or rub off. Designed for easy application and firing, our Ceramic and Glass Decals are LEAD-FREE and FOOD-SAFE. Our ceramic and glass overglaze decals are known for their permanence and vibrant colors, including rich blacks. 𝗖𝗵𝗼𝗼𝘀𝗲 𝗳𝗿𝗼𝗺 3 𝗱𝗲𝘀𝗶𝗴𝗻 𝘃𝗮𝗿𝗶𝗮𝘁𝗶𝗼𝗻𝘀 𝗶𝗻 𝗲𝗶𝘁𝗵𝗲𝗿 𝗖𝗲𝗿𝗮𝗺𝗶𝗰 𝗼𝗿 𝗚𝗹𝗮𝘀𝘀 𝗗𝗲𝗰𝗮𝗹 𝗮𝗽𝗽𝗹𝗶𝗰𝗮𝘁𝗶𝗼𝗻𝘀. • Small 11 pcs. - 7/8" - 2 7/8" • Medium 11 pcs. - 1 1/2" - 5" • Large 11 pcs. - 2" - 7" Size is measured by the longest side of the decal. 𝗫𝗽𝗿𝗲𝘀𝘀𝗶𝗼𝗻 𝗗𝗲𝗰𝗮𝗹𝘀 utilizes the latest technology for commercially printing overglazed waterslide ceramic and glass decals. 𝗙𝗢𝗟𝗟𝗢𝗪 𝗢𝗨𝗥 𝗙𝗜𝗥𝗜𝗡𝗚 𝗜𝗡𝗦𝗧𝗥𝗨𝗖𝗧𝗜𝗢𝗡𝗦 𝗙𝗢𝗥 𝗢𝗣𝗧𝗜𝗠𝗔𝗟 𝗥𝗘𝗦𝗨𝗟𝗧𝗦: 𝗖𝗘𝗥𝗔𝗠𝗜𝗖: Cone firing: Fire cone 016-015 (1422°F - 1454°) - FIRE FAST SPEED Digital Firing: Segment 1: 0 - 788°F - 2 hours (394° per hour) Segment 2: 788°F - 1454°F - 1 hour (666° per hour) Hold: 10 minutes 𝗚𝗟𝗔𝗦𝗦: Cone Firing: Fire cone 022 (1150°) - FIRE MEDIUM SPEED Digital Firing: Segment 1: 0-788°F - 3 hours (253° per hour) Segment 2: 788°F - 1148°F - 1 hr 30 minutes (240° per hour) Hold: 15 minutes 𝗜𝗡𝗦𝗧𝗥𝗨𝗖𝗧𝗜𝗢𝗡𝗦 𝗙𝗢𝗥 𝗔𝗣𝗣𝗟𝗜𝗖𝗔𝗧𝗜𝗢𝗡: Cut out the decal and soak it in tepid water. Slide the decal off the paper onto your moistened piece. Squeegee out the water and let it dry for 2-3 hours. Fire per the instructions above. 𝗧𝗮𝗸𝗲 𝗮𝗱𝘃𝗮𝗻𝘁𝗮𝗴𝗲 𝗼𝗳 𝗼𝘂𝗿 𝘀𝘂𝗽𝗲𝗿 𝗱𝗶𝘀𝗰𝗼𝘂𝗻𝘁 𝘀𝗰𝗵𝗲𝗱𝘂𝗹𝗲! 𝗔𝗽𝗽𝗹𝘆 𝘁𝗵𝗲 𝗳𝗼𝗹𝗹𝗼𝘄𝗶𝗻𝗴 𝗰𝗼𝘂𝗽𝗼𝗻 𝗰𝗼𝗱𝗲𝘀 𝗶𝗻 𝘁𝗵𝗲 𝘀𝗵𝗼𝗽𝗽𝗶𝗻𝗴 𝗰𝗮𝗿𝘁: Purchase $100.00 save 10%: Use Code: Express10 Purchase $200.00 save 15%: Use Code: Express15 Purchase $300.00 save 20%: Use Code: Express20 Purchase $500.00 or more save 25%: Use Code: Express25 𝗗𝗲𝗰𝗮𝗹𝘀 𝘀𝗵𝗶𝗽 𝗶𝗻 𝟮-𝟱 𝗯𝘂𝘀𝗶𝗻𝗲𝘀𝘀 𝗱𝗮𝘆𝘀.

Blue Rose Clock PNG file only. Beauty in blue Victorian style clock. Perfect for a breast pocket or shirt for sublimation or DTF. Would look beautiful on a 20 or 30 oz tumbler. Great for waterslides to make pens as well. Image is at 300 DPI or higher. All sales are final, no refunds allowed on digital files. Please don't message asking for image to be resized. Image is of quality for DTF of 12x12, tumblers for 20 oz and 30oz Hoggs or for anything smaller.

Kikkerkoning keramische decal, kikker, decals voor glas, decals, victoriaanse decals, keramische transfers, sprookjes decals, 740-850ºC Keramische transfer CR Serie: Kikkerkoning Formaat: 10 x10cm Inbrandtemperatuur: 740-850 ºC Deze keramische transfer kan gebruikt worden voor het decoreren van keramiek, aardewerk, tegels, glas, glas versmelten, gebrandschilderd glas, glas-in-lood, emailleren en mozaiek. Het kan worden geglazuurd (na inbranden), versmolten op of tussen lagen glas, gecombineerd met brandschilderen. Voor het beste resultaat met glas, gebruik een witte of lichtgekleurde opalescent b.v. Spectrum 200S of 200SF voor glasversmelten. Temperatuur voor inbranden op glas 740 ºC. Wordt verzonden vanuit Nederland. Stained Glass Elements is een professioneel glazeniersatelier met ruim 30 jaar ervaring. Gespecialiseerd in gebrandschilderd glas, glasschilderen, zeefdruk op glas, keramische transfers, glas fusing, glas-etsen en restauratiewerk. Van kleine originele raamhangers tot grote gebrandschilderde glas-in-loodramen. Opdrachten zijn Welkom! Op zoek naar een orgineel kado? 'n familiewapen, jubileumraam, portret van geliefde, kinderen of huisdier, hobby of interesse, favoriete landschap of architectuur, auto of huis vereeuwigen?, informeer dan naar de mogelijkheden. Voor glazeniers, glasateliers, glaskunstenaars, tiffaniers en glashobbyisten bieden wij een verscheidenheid van gebrandschilderde halffabrikaten zoals, glasschilderingen, ornamenten op glas, glas motieven, gebrandschilderde ruitjes. Klaar om toegepast te worden in glas-in-lood en/of Tiffany werk. Een glasschildering of ornament is een blikvanger en geeft een kunstwerk 'n unieke uitstraling. Een eigen idee laten uitvoeren behoort tot de mogelijkheden. Ervaring met veel verschillende stijlen oa: Amsterdamse School, Art Nouveau (Jugendstil), Art Deco, Neogotisch, Victoriaans, Arts & Crafts, Prairie School, Abstract, Pop-surrealisme. Wordt verzonden vanuit Nederland.

Click here to view this article from www.thestar.com.

❤️{title} ❤️ This file is made to be used for Sublimation Printing and Design *WHAT YOU GET* Files in the following formats: – 01 PNG files (3000 x 3000 px, 300 DPI ) – 01 SVG files – 01 EPS files – 01 PDF files – 01 DXF files Please note: This is a digital instant download. No physical item will be sent to you.   These PNG files are intended for sublimation, waterslide, or regular printing.   There are NO cutting files included in this product.   This design is perfect for creating: cards, frame artwork, cups, scrapbooks, sublimation products, T-shirts, pillows, bags, and mug stickers.   Colors may vary between devices and printers.   Thank you for visiting!!

Ceramic Transfers Color Serie: Zodiac - Libra (Scales) - 23 September –23 October Size: 3.94 x 5.91 inch (10 x 15 cm) Firing temperature: 760-850 ºC (1400-1562 ºF) This decal can be applied to, or used in combination with, ceramics, pottery, ceramic tiles, glass, fused glass, stained glass and mosaics. It can be overglazed (after firing), fused on top or in between layers of glass, painted with vitreous paints and/or enamels. For best result when used with glass, use a white opalescent glass, like Spectrum 200S or 200SF for fusing. Stained Glass Elements is a professional glass studio with over 30 years experience. Specialized in stained glass, glass painting, screen printing on glass, glass fusing , glass-etching and restoration . From small suncatchers to large stained glass windows . Custom orders are welcome! Ask for the possibilities. For stained glass artists, glass studios, tiffany crafters we offer a variety of semi-finished products such as kiln-fired glass paintings , ornaments on glass, glass patterns, motifs on glass. Ready to be implemented in your glass and/or Tiffany work. A glass painting or ornament is an eye-catcher and provides a work of art a unique look. Experience with many different styles including : Art Nouveau ( Jugendstil ), Art Deco, Neo-Gothic, Victorian, Arts & Crafts, Prairie School, Amsterdam School, Abstract, Pop Surrealism. Ceramic decals Libra zodiac sign fusible transfer Scales waterslide decal for ceramics glass fusing torch and enameling Astrological serie

Durge and Astarion first meeting 💕