In this tutorial, we'll show you how to seal vinyl on a piece of acrylic using UV resin. It's actually easier than you think! Prep your piece of acrylic by rubbing it down with a paper towel and isopropyl alcohol. Next, transfer your vinyl monogram onto the acrylic. Make sure to burnish the vinyl down really, really well! You can find the monogram font used on this acrylic keychain in the Ultimate Crafter's Font Bundle. Place your acrylic on a silicone mat to protect your work surface. If you cure UV resin on it, it is easily removed. Squirt a small blob of UV resin into the middle of the acrylic. You don't need much, and less is better than more because it's always easier to add more, than it is to remove excess. Carefully, rotate and tilt the acrylic to get the resin moving evenly towards the edges. Then, use a silicone tipped tool to start carefully pulling the UV resin towards the very edge of the acrylic. And thanks to the laws of physics, the UV resin will make a lovely bubble-like ridge at the edge of the acrylic. Be extra careful working around the hole in the acrylic (the hole for a keychain) so the resin does not flow into it. If you're seeing