PLEASE READ THE WHOLE DESCRIPTION AND POLICY TERMS BEFORE PURCHASE. Custom embossed printed MDF board for Glowforge, Xtool or another laser cutting. We encourage every customer to buy one board first as a sample before ordering a large quantity. Colors can look slightly different on the web/screen than in reality. If color is critical please contact us to arrange for a sample or buy one piece first to see if it will work with your project since we have no returns on the printed items. Single sided printed or double sided printed options from the menu. Following are settings that we got as a feedback from customers, they are only as a reference and not verified by us. Glowforge settings for Embossi Printboard printed on both sides: Medium Draft board, tab width .125" (quite snug), no mask, wipe lightly with rubbing alcohol. May vary slightly with each user. xtool laser I use the cherry wood setting at 100 power Select your pattern in the style menu, the picture of the pattern will pop up in the window. Select in print option for printing on one side or printing on both sides (same pattern). Texture of the print can slightly vary on some patterns depending on the amount of ink or the orientation of the fiber within the board from front to back. The boards are approximately around slightly under 12 inches by 19 inches, 1/8th inch thick. If you have questions about the product and want to find out if it works with your project please ask questions first and more important buy one board to try it out since we do not have returns on any of the printed items. Our items are custom made to order; therefore NO RETURNS or exchanges will be accepted.