THIS IS A DIGITAL FILE, NOT A PHYSICAL ITEM This file includes the two designs pictured. You will cut the outlines in red, engrave the designs in black. You can also cut the circles in blue if you choose, or ignore and use a leather punch for your own holes/placement. This file is Glowforge tested. You will not get the same results pictured if you score!! I strongly recommend engraving as that is what they were designed for. You may make as many physical items as you would like for personal use or sales with this purchase. You may not resell this file or components of this file. Please contact me with any questions! I would love to see what you create. My Process: I cut/engrave clean and dry veg tanned leather. When it’s finished, I clean it up with a leather cleaner (I use Fiebings) and allow to completely dry. At this point, apply paint if desired (I use acrylic paint but you can get leather paint also) and oil once paint is dry. I seal my edges (I use edge flex) and seal the top (I use resolene). I use line 20 snaps- my hole options should fit these if you choose to use them. PLEASE NOTE: on the thicker bands, I place 2 snaps because I feel the edges catch less this way and it seems more flush to me. You can ignore that option ( the holes are in blue) and leather punch your own holes, or adjust the file to your liking.