This Capital Reaper Sovereign 3D Model STL pack includes everything you need to print your own reaper. This 3D printed model can stand with or without base. You decide to put it on the EARTH base or not :) Features: Dimension: 30 x 11 x 11 cm(Sale it up or down to meet your size requirement) Zip file includes: Reaper 8mm Dowel.stl Reaper Body Left.stl Reaper Body Right.stl Reaper Leg 1 Left.stl Reaper Leg 1 Right.stl Reaper Map.stl Reaper Trigger 1 Left.stl Reaper Trigger 1 Right.stl Reaper Trigger 2 Left.stl Reaper Trigger 2 Right.stl Reaper Trigger 4 Left.stl Reaper Trigger 4 Right.stl Reaper Drawing.png Reaper Assembly Instruction.png Reaper Printing Instruction.png Assemble Instructions (No sand paper, glue or paint included in the package): 1. Sand first to make sure all parts and joints are smooth and not too tight or too loose. 2. Put Sovereign pieces together with the reference supplied in the package, no glue yet. 3. Use Super Glue or Epoxy Glue to stick each part together if Step 2 goes well. 4. Make sure the glue has been set then apply Wood Filler to gap between the glue connection. 5. Sand after Wood Filler dry hard (120+ sand paper. 600+ for final sanding) Painting suggestions: 1. For three main ship body pieces, better to assemble them before painting as you may need to polish the connection areas after the glue dries. 2. Four steps for painting: Sanding, Priming, Painting and Coating. Make sure to go through the whole process to get the best result. Ready to use: If you don't want to print it yourself, you can buy the 3D printed model from us. You can check out the product in our list. For personal non-commercial use only. Please follow and tag us on Instagram(@YuIoTLAB ) or Facebook(@YuIoTLAB). We'd love to see your feedback!