Hi there! Now that we have our quilt tops ready to go, I want to show you how to baste your quilt! But first, we need to go over batting. Let's talk batting. For a first time quilter--this is something that can sort of confuse you. There are several options out there and each batting will change the final look of your quilt. Here are some of the options out there when you go shopping for batting: First up is a Cotton-Poly Blend. This is made up of usually 80% cotton and 20% polyester. It is less expensive than 100% cotton, but it is not as soft and warm in my opinion. You will also get less shrinkage with the blend batting. This is also a great option for machine quilting because it's not super thick and not slippery like 100% polyester. I do use this type on a regular basis and have had good results with it. Next we have our 100% cotton batting. This is by far my favorite to use in my quilts. It shrinks more than the other types and gives your quilt a more vintage wrinkly feel when you wash and dry your quilt for the first time--which I really happen to love! If that's not your thing--then I would use a blend. I also like the actual feel of the 100% cotton. Now let's talk Polyester! Polyester generally comes in different "lofts." This just means some are thicker and others are thinner. Polyester makes quilts look a bit puffier in my opinion and it is a bit slippery to machine quilt with. A lot of people prefer to use polyester when they tie a quilt or do hand quilting. This batting also doesn't really shrink after you wash it either. It is by far the least expensive out of all the types of batting I am showing you here. This last batting Warm and Natural is by far the most expensive in the one's I have listed here--but it has a really lovely feel to it. It is not a 100% cotton, but to me it feels almost the same. The one I am showing you is not completely white, but a little off white. They offer the same batting in white as well-but this is the one I had on hand. It does have a bit of shrinkage when you do your first wash, but it is not very substantial--but it does give your quilt a nice vintage feel to it after your initial wash. Now that we have covered batting, let's talk about basting our quilt: What does it mean to baste? Basting simply means you are securing your three layers of your quilt so that is ready to be quilted. You can baste your quilt using basting pins, spray adhesive, or you can use basting stitches. I prefer pin basting, and think it is great for a beginner to try. Before you cut your backing fabric, you will want to make it about 2-4 inches larger on all sides than your quilt top. We do this so that you have plenty of room when you are quilting. It would not be fun to start quilting and realize you don't have backing or batting at the edges of your quilt! First, lay your your backing face down on a hard surface. Tape all your corners and pull your backing relatively tight. Not so tight that your tape is going to come up, but pretty tight so that you get all your wrinkles out: Now you are going to lay your batting right on top. You will want your batting to be pretty much the same size as your backing fabric. If your batting has a lot of wrinkles in it from being folded, lay it out a few hours in advance to let the wrinkles come out. I do not recommend ironing your batting---especially polyester batting! Try and get the wrinkles out the best you can. Now you want to lay your quilt top on top of your batting. You want to make sure your top is nice and wrinkle free. Give it a good ironing before you baste it so that you aren't fighting wrinkles. Also, once you lay it on, smooth it out the best you can. You can see in the picture below I have quite a bit of space on the right side. I could have centered the top, so that I had a lot of room---more than the four inches on those sides. I decided to trim off some of the excess on that side after I basted it because I really didn't need that much overage. If you are really a beginner---it is good to have the excess! It won't be a problem for you! Now it is time to baste. I like to use "basting pins" rather than just plain old safety pins. Basting pins do not leave large holes where you pin it and they also have a curve to them so that it's easier to lock them in place when you are basting. I decided to pin this on all corners of each block, but could have added more pins by adding some to the center of each block as well. Since my quilt was very small--36" x 36" I didn't go crazy with the basting. If you are quilting a larger quilt, I would do quite a bit more pins--making sure all the layers are secure! Lastly, I just wanted to mention that I don't baste my quilt until I know I am absolutely ready to quilt it. You do not want your quilt basted with pins in it for a long period of time because the pins will leave holes if they are left for too long. So I generally baste, and quilt the same day or within a week. Next week, we will finish our quilt up! I will show you how I quilted mine and give you a few pointers on straight line quilting and free motion quilting! Talk to you soon,