Hello! Below you will find the instructions to make the next block in the Vintage Block quilt Along - The Secret Drawer from the Kansas City Star, circa 1930. I love this block and I think it is my favorite so far, thought I feel that way about each of these vintage blocks : ) After completing this block you will be a Y seams expert! The are not as hard as they look and I will give you tips for success! OK....lets get started: Pattern for piece B can be found [Here] Fabric: all pieces include a 1/4" seam allowance Cut 1 - A 4 3/4" Print Center Square Cut 8 - B Background Fabric Cut 8 - B Spool Fabric Cut 4 - C 2 5/8" squares for center spool Cut 2 - D 5 1/8" squares background fabric, then cut these squares diagonally to make 4 triangles Cut 2 - E 3 7/8" squares background fabric, then cut these squares diagonally to make 4 triangles Materials: 100% cotton thread Marking pencil or pen See thru ruler Rotary cutting supplies Notes: All seam allowances are 1/4" Tip for Cutting Piece B. Cut 1 9/16" strips and lay piece B on the strip cutting the diagonal seam with you rotary cutter. Create the spools: 1) Mark the center spools C 1/4" from each edge and 1/4" from raw edge. I like to draw a seam line and make marks for the 1/4" point. Place B spool right sides together with C inside spools. Pin in place ***In order to make sure both pieces are centered, I fold both pieces in half and create a crease mark. Match the crease on B to C to insure they are placed correctly*** 2) Stitch the seam, stopping 1/4" from beginning and end of seam. If you go over the mark (like I did on the top left) use your seam ripper to remove the stitches. Repeat for the other side. Press seams open. 3) Place piece B - background fabric to Piece C right sides together. Pin in place. 4) Flip over the spool and stitch the seam starting and ending at the previous stitching, 1/4" from edge. Start 1 stitch inside the previous stitching line. Again, if you stitch into the previous seam, use your seam ripper to remove the stitches. Repeat for the other side. 5) Place the diagonal edges of both B pieces right sides together and pin in place. Start stitching 1 stitch away from the previous stitching back tacking at ends. Repeat for the other side of the spool. 6) Press seams towards the dark pieces. Repeat for the opposite side. 7) Your finished Spool with look like this. Repeat steps #1-6 for the other three spool blocks. Assemble the block 8) Lay out your block as pictured. Stitch together Row 1. Stitch together Row 2. Stitch together Row 3. Stitch row 1 to 2. Stitch Rows 1/2 to 3. Attach the top and bottom corners. Yay!!!! you are done!! Easy, peasy, lemon squeaky - as my 6 year old would say! : ) If you have any questions, please leave a comment below and I will answer your questions! Happy Sewing! xo Charise