The picture in the photos is Large- 47 height and 49 lengths. This comes as a two-piece artwork each piece is 47 height and 24 in length. Our three-dimensional art is created from lumber to finished piece in a countryside shop. To create each piece of dowel art, the wood is selected, milled down to identical pieces, and individually sanded on all four sides. If stain is used in the piece, it is applied before putting together to ensure a uniform look every time. It is then put together, adhering each piece with wood glue and nails for a quality and lasting bond. After the edges are trimmed down, and touch ups are done, it is then ready for finish. On all pieces except for the natural wood pieces that are left raw, we use a water-based polyurethane. I use a matte finish to keep the pieces muted and allow the design to be the center focus. This process usually takes an entire day as to brush polyurethane onto these Dimensional art pieces is tedious work. Each piece takes 2-4 coats before completion. The final stages of these pieces are to attach the frame, touch up the piece, and apply hardware. CUSTOM OPTIONS AVAILABLE If you would like to adjust sizing or color tones in this piece, please reach out, we are more than happy to assist you!