Moel Armchair by Ligne Roset With the exception of its all-enveloping back, Moel draws heavily on Ligne Roset's longstanding expertise in the field of all-foam models. With its generous Comfort underlined by its soft, rounded shape, Moel will appeal most to lovers of an informal, relaxed lifestyle, who want to welcome their friends in the most convivial way possible. Not forgetting, of course, that Moel does not look like any other seat in existence. Construction Structure in thermoformed ABS (a combination of elastomer and resin which results in a highly durable plastic), clad in polyether foam 26 kg/m3 - 5.7 kPa. Decorative rear feet covered to match frame. Comfort Integral seat cushion in high resilience polyurethane Bultex foam 32 kg/m3 - 2.8 kPa with a Comfort layer in Bultex foam 26 kg/m3 - 1.4 kPa. Quilted seat cushion in Bultex foam 26 kg/m3 - 1.4 kPa. Integral back cushion with headrest (for hight back version only), lumbar and armrests in Bultex foam 26 kg/m3 - 1.4 kPa clad in 200 g/m2 polyester quilting. Footstools in Bultex foam 48 kg/m3 - 5.3 kPa. Making-up Back and seat Covers quilted with bands of 300 g/m2 polyester quilting, giving a strikingly Structured visual effect. Covers of footstool quilted with 200 g/m2 polyester quilting. Rear of back is in the shape of the corolla of a flower, and is held in place by metallic zips: this can be made up in Kyoto or Oregon hides or Divina or Coda Fabrics. Covers are held in place by velcro and zips, and are fully removable. Fabrics 'Inside' Covers are ordered independently of the exterior 'corolla', thus making bicolour (or bi-material) interpretations a possibility. Footstools can also be bicolour: Inga Sempe recommends using the same covering material on the sides of the footstool and the corolla of the armchair or settee, and a different one for the front, back and top of the footstool and the 'inside' Covers of the armchair or settee.