Delivery: IN STOCK. Delivery: 1 - 2 days Key Features: Material: Canadian Red Cedar Grade: Certi-label® Certigrade No. 1 Blue Label Size of Ridge: 18"/457mm Coverage: 1 bundle = 5.03 linear metres Surface: Smooth, taper-sawn with a natural appearance Application: For use on ridge or Hip Use: Blue Label is recommended for premium applications where a high-quality finish is required Saw Mill: Waldun - Canada's largest saw mill in British Columbia Description: Certi-Ridge® Shingle Hip & Ridge Units are pre-assembled caps for intersecting roof surfaces at hips and ridges. They are manufactured from Number 1 Grade Western Red Cedar shingles and supplied in bundles of 36 units, which will cover up to 5m of hip or ridge. Certi-Ridge® Shingle Hip & Ridge Units are made from two pieces fastened together by temporary staples, which allows flexibility to accommodate a range of pitches. They are 18"/457mm in length and have a butt thickness of 11.5mm. They are not less than 7″/178mm wide (measured on the inner surface at the butt end). These units have a Number 1 Grade, Blue Label and create a weather-tight joint at intersecting roof surfaces, providing an attractive 'finishing touch' to cedar shingle roofs. They come with Certi-label® quality assurance and are PEFC Certified, with Waldun Production. Each bundle consists of 18 units with a left-hand overlap and 18 units with a right-hand overlap, which are installed alternately at the same weather exposure as the roof shingles. They are fixed in position with concealed nails. Cedar hip and ridge roof caps have been used for hundreds of years and have proven their durability in all kinds of climates. Ridge caps help provide an attractive finish and protection where shingled roof joints meet. Downloads & Data Sheets: Cedar Shingle Blue Label Coverage Guide Cedar Shingle Manual & Installation Guide Cedar Shingle Product Guide Cedar Shingle Warranty