Matt white and matt black finishes are exciting new additions to this minimalist light switch. The LS990 is a modern classic in switch design, admired by architects since 1967 for its restrained, clean lines and the softly rounded, oversized rocker in the same material as the frame.
As full-time artists who work from our home, it’s important to have spaces throughout our house that feel both creative and bold, as it helps foster our own creativity. Learn where I splurged & where I up-cycled to create this rich and bold bedroom design.
Description Forbes & Lomax’s Toggle Switches are based on the elegant nickel and brass light switches of the 1930s. These simple, timeless switches are a refined detail in any interior. Toggle Switches are rated at 15 amps and come in 3-way and 4-way versions. 3-way switches can also be used as single pole switches. Toggle Switches can be mixed with Rotary Dimmers and push buttons on the same plate. Contact us for custom configurations. Established in 1987, Forbes & Lomax is a UK based company with a reputation for high quality design amongst architects and designers. Specifications Switch: Ø 20 mm (0.79”) 1 Gang Plate: W 70 mm (2.76”) X H 115 mm (4.53”)2 Gang Plate: 115 mm (4.53”) X 115 mm (4.53”)3 Gang Plate: W 162 mm (6.38”) X 115 mm (4.53”)4 Gang Plate: W 210mm (8.27”) X 115 mm (4.53”) Available for: Line Voltage (For use in conventionally wired installations) 3-way, 15A (also works as Single-Pole) 4-way, 15A (contact us) Low Voltage: For use on Class 2 Circuits only 2-Position Momentary Dry Contact Toggle (contact us) 3-Position Momentary Dry Contact Toggle (contact us) 3-Position Latching Dry Contact Toggle (contact us) See full Technical Specification sheets below. Important Notes: Toggle switches conform to UL 20 and are certified to CSA C22.2 No.111. Please review and ensure all certifications are applicable for your local code. If unsure, please send our Sales Team full SPECS of lighting for a compatibility review. Must be installed by a licensed electrician. Toggle Switches install into standard junction boxes but the boxes must be recessed below the finished wall surface by at least 1/8". Please refer to the Wallbox Assemble Diagram in the Installation Guide below. If you are installing into existing junction boxes, you will probably find the boxes are already recessed by at least this much but please check to make sure before placing an order. Areas of application: Light-duty Commercial, Residential Material(s) Unlacquered Brass Aged Brass Nickel Silver Brushed Stainless Steel Antique Bronze Note: materials will slowly age or oxidize over time. Wipe clean with a dry, non-abrasive microfiber cloth. Avoid use of chemical or alcohol based cleaners. Refer to the care guide below for best practices. Product Downloads Toggle Switch Product SheetToggle Switch Installation GuideForbes and Lomax BrochureForbes and Lomax Care Guide
TEMPORARY EXTENDED LEAD TIMES!!! My laser cutter is back up and running but I am playing a game of catch up. I am leaving my extended lead times for the moment but hopeful to get things out faster. Thank you for your understanding and support. Take a trip in the clouds and give your light switches a personality of their own with one of these acrylic switch plate covers. Laser cut from acrylic and pieced together by hand, they are available in both traditional toggle and rocker switches. A recess on the backside makes room for the electrical box. Comes with two white headed screws (one for outlet.) See my shop for more styles including "Sky of Clouds" https://etsy.me/3tuo7eR MATERIALS & DIMENSIONS Matte acrylic 4-5/8"w x 5-7/8"h x 1/4"d PACAKAGING & SHIPPING Items are handmade and ready to ship out in 3-5 business days (custom orders may take longer) and ship via USPS. Please refer to USPS for estimated delivery times. CHECK US OUT & FOLLOW See even more products at poppyandhoneybee.com Instagram: www.instagram.com/poppyandhoneybee Pinterest: www.pinterest.com/poppyandhoneybee
This is the Clit Switch from the Turned on Series The perfect home decor gift for the maximalist in your life! Display this light switch cover in your living room, bedroom, or give to a fun-loving friend that enjoys a little adult humor. Thank you for your interest!
Fun wavy acrylic light switch covers. Transform your boring light switch by simply placing the cover over and applying with the double sided tape provided. Available in a variety of colours. Fits a standard single UK light switch. Gap inside is 87cm x 87cm Overall measurements of light switch 20cm width x 20cm
Re-designed retro switches manufactured in Europe by Katy Paty. This one in black comes with the slim switch. Made of traditional porcelain which is engrained and abrasion resistant. The colours are constant and, unlike colours of plastics they are UV and Dust resistant. Constant colour and highly abrasion-resistant surface. Enamelled and handmade in a top glossy quality. CE conformity certificate available on request. Decorative cover. Guarantee 50 years. Exceptionally durable mechanism with guaranteed warranty of 10 years. The switch as a unique design that rocks side to side in its entirety. 250V / 10A, minimum pitch of centers of concealed installation boxes is 100mm (min.95mm), box depth 43mm. Designed for cavity walls and solid walls. Add the wiring back box which is not included in the price. Assembled to order, please allow 3-4 weeks for delivery.
SELECT WHITE IF YOU WOULD LIKE IT TO LOOK LIKE THE PHOTO! The color in the photos is WHITE. The yolk is always yellow you are picking out the EGG WHITE. These are 3D-printed light switch covers, designed by me! They are all made to order so allow up to 2 weeks of processing time. They're made from PLA, with several colors available. :) These are wider than your average light switch cover, so please make sure they will fit in your space before you buy them! They will screw on to any standard single-gang toggle light switch. The color in the photos is WHITE. The yolk is YELLOW you are picking out the background color. They measure about 5.5"x 5.7"x1/2"
Various decorative pattern Talavera bisque light switch and plug covers. They measure 4.75" x 4.75". A 1/4" thick. Check out other decorative tiles sections for possible tiles that match these patterns. Pictures are in the following patterns: T-101, T-42, & T-105. Choose which one you want at check out. The last picture is showing what they look like on back. Please Read: This is old/vintage and/or discontinued products we have accumulated through-out the years and are discounting from the regular price we usually sell our products for. Sold as is. Due to the nature of this hand-made & hand painted product, it may be irregular in shape, size, dimension, texture, and color. Minor chipping and crazing are also inherent in this product. Not recommended for outdoor use in colder climates. Prior to purchasing, we do recommend that you please check out our “shop policies” page & “additional policies & FAQs” for more information you may want to know on us, the products, and shipping. All sales final. Shipping included. Priced to sell. Check out our current inventory at www.reesotiles.com.
Fun checkerboard acrylic light switch covers. Transform your boring light switch by simply placing the cover over and applying with the double sided tape provided. Each one is printed and applied by hand with high quality sign vinyl in our studio. Fits a standard single UK light switch. Gap inside is 87mm x 87mm Overall measurements of light switch 14cm width x 16.5cm Sticky tape is supplied for application to wall.
Functional fixtures are finally getting a splashy makeover and we've got you covered. We rounded up our favorite colorful appliances, hardware, and finishes to add a pop to your kitchen, bathroom, or living space.
Fun wavy acrylic light switch covers. Transform your boring light switch by simply placing the cover over and applying with the double sided tape provided. Available in a variety of colours. Fits a standard single UK light switch. Gap inside is 87mm x 87mm Overall measurements of light switch 20cm width x 20cm
Frankenstein Light switch | Halloween | Home decor | Gift | Wall Decor | Steampunk | Mad Scientist | Scary This light switch will fit a standard U.S. light switch and is made out of PLA PLASTIC. (SCREWS NOT INCLUDED) Instructions: 1. Remove screw from wall switch plate. 2. Replace switch plate with new decorative light switch plate. 3. Place the switch rocker over the switch toggle. SIZES (approximate) --------------- Height: 4.75 inches Width: 0.89 inches Length: 3.00 inches PLA PLASTIC can warp from exposure to heat, protect from prolonged exposure to the sun and moisture. Keep in mind these are 3D printed in a small production environment. Due to the nature of this process, small imperfections can sometimes appear and are considered normal. We inspect every piece and make sure that only top quality models will go out. Design by LoboCNC https://www.printables.com/model/132335-frankenstein-light-switch-plate
***** Listing for One Metal (1) Single, Outlet ,Rocker GFI Cover, Double Cover Or Triple Cover With Gold Painted Top tones to simulate distressing as shown in Picture # 2 Picture # 1 Hand-painted in Creamy Ivory Picture # 2 Hand Pained in Shabby White Picture # 3 Hand Painted in Victorian Black # 1 Triple Cover # 2 Double Cover # 3 Single Cover # 4 Outlet Cover # 5 Rocker GFI ( HARDWARE NOT INCLUDED . You'll be surprised how much a difference MATCHING hardware can actually make. Purchase here : https://www.etsy.com/listing/123475885/2-painted-screws-to-match-all-wall?ref=shop_home_active Measurements : SINGLE Switch Plate Cover Measuring Approximately: 3 1/2 " x 4 1/2" OUTLET Switch Plate Cover Measuring Approximately: 3 1/2 " x 4 1/2" ROCKER GFI Switch Plate Cover Measuring Approximately: 3 1/2 " x 4 1/2" DOUBLE Switch Plate Cover Plate Measuring Approximately: 4 3/4" by 4 3/4" TRIPLE Switch Plate Cover Plate Measuring Approximately: 6" Tall 6 1/2" Wide Double Rocker GFI : 4 3/4" by 4 3/4" Hardware not included , purchase here : https://www.etsy.com/listing/123475885/2-painted-screws-to-match-all-wall?ga_search_query=screws&ref=shop_items_search_1&crt=1 Alacartcreations
Fun wavy acrylic light switch covers. Transform your boring light switch by simply placing the cover over and applying with the double sided tape provided. Each one is printed and applied by hand with high quality sign vinyl in our studio. Fits a standard single UK light switch. Cut out middle size is 87cm x 87cm Sticky tape is supplied for application to wall. 20cm x 20cm
***** Listing for One (1) Single, Outlet ,Rocker GFI Cover, Double Cover Or Triple Cover **** Picture # 1 Blushing Pink With Gold Painted Top tones to simulate distressing Picture # 2 Shabby White Picture # 3 Hand-painted in Creamy Ivory Picture #4 Hand Painted in Victorian Black ALL COVERS WILL BE PAINTED WITH GOLD TO SIMULATE FAUX DISTRESSING UNLESS SPECIFICALLY REQUESTED BEFORE PURCHASE. PLEASE CONTACT US IN ADVANCE IF YOU NEED NON-DISTRESSED. PICTURE # 1 : In Blushing Pink (Shown from Left to Right starting on the top) # 1 Triple Cover # 2 Double Cover # 3 Single Cover # 4 Outlet Cover # 5 Rocker GFI --------------------------------------- Picture 2 is our Double Rocker GFI Hardware not included . Purchase here : https://www.etsy.com/listing/123475885/2-painted-screws-to-match-all-wall?ref=shop_home_active Measurements : SINGLE Switch Plate Cover Measuring Approximately: 3 1/2 " x 4 1/2" OUTLET Switch Plate Cover Measuring Approximately: 3 1/2 " x 4 1/2" ROCKER GFI Switch Plate Cover Measuring Approximately: 3 1/2 " x 4 1/2" DOUBLE Switch Plate Cover Plate Measuring Approximately: 4 3/4" by 4 3/4" TRIPLE Switch Plate Cover Plate Measuring Approximately: 6" Tall 6 1/2" Wide Double Rocker GFI : 4 3/4" by 4 3/4" Alacartcreations
NOAH'S ARK light switch cover Ceramic, 3 dimensional A three dimensional Lovely, Noah's Ark light switch Cover. 6 inches high x 4 inches wide Shiny and No crazing. This is a great light switch for a Kid's Room, Playroom, Nursery Room, Bathroom or Bedroom! It will look lovely wherever it is! Vintage and once loved items are perfectly imperfect. ZOOM into picture to appreciate the detail. If you have any questions please email me, for more lovely viewings please visit: https://www.etsy.com/ca/shop/LovelyThingsBtqShop
These are 3D-printed light switch covers, designed by me! They are all made to order so allow up to 2 weeks of processing time. They're made from PLA, with several colors available. :) They will screw on to any standard single-gang paddle light switch! Please measure and make sure these will fit your space! Light switches are often installed in weird places/corners and these are a bit larger than standard covers :) The color pictured is PURPLE! They measure about 5.25"x3.5"x0.5"