I had this neat idea to control a mobile robot using Node-RED. Before creating the Node-RED dashboard for a robot, I wanted to create something simple as a proof of concept. And, in this article, I’m going to share with you how to configure Node-RED with the Wemos D1 Mini using MQTT. I recommend you […]
Descrizione dello shield per caricare una batteria e alimentare il Modulo Wemos D1 mini
Was der neue Wemos D1 Mini in der Version V4 kann und was die Unterschiede zum Vorgängermodell sind, erfährst du hier.
Come realizzare shield per misurare le distanza da montare su un Wemos D1 mini
D1 Mini ESP32 WiFi + Bluetooth D1 Mini ESP32 WiFi + Bluetooth Der D1 Mini ESP32 WiFi + Bluetooth kann als Weiterentwicklung (Nachfolger) vom Wemos D1 Mini ESP8266 bezeichnet werden. Das Board verfügt über WiFi, Bluetooth und Bluetooth LE sowie mehr IO Pins und verbesserte Analogeingänge. Der ESP32 kann unter Arduino un
Use a Micropython Wemos to display time, atmospheric pressure, apparent temperature, and precipitation probability from Darksky API. Find this and other hardware projects on Hackster.io.
Temperature Logger With Nodemcu Esp8266 D1 Mini to Thingspeak: I know this looks like just another WiFi logger, but this is a little bit more. It uses Thingspeak free service, can be configured through WiFi AP, and uses minimal components. It only needs 3 components: Wemos D1 mini (or nodemcu v1.0 if you prefer…
Indoor Temp, Humidity and/or Barometric pressure sensor using Wemos D1 Mini - PaulRB/WemosSensor
Last week, we looked at fetching data from dweet.io using Python. Then we found a way to retrieve data and store it in a local database. In this tutorial, we’re going to create our own electronic device and publish data to dweet.io. Hardware for this project You will need a WiFi-compatible controller to complete this […]
This housing is designed to hold an ILI9341 display 2.8" and a Wemos D1 mini. For my need i also use a temperature and humidity sensor DHT22.It
Fritzing Part: WeMos D1 Mini Shields. Contribute to mcauser/Fritzing-Part-WeMos-D1-mini-Shields development by creating an account on GitHub.
Das D1 Mini-NodeMcu WiFi Board basierend auf einem ESP-8266-12F. 9 digitale Ein- / Ausgangspins (interrupt/pwm/I2C/1-wire und Mikro-USB-Anschluss). Ultra-kompakte Bauform. Drathloses D1 Mini Entwicklungsboard ist D1 Mini kompatibel und kann in der Arduino-IDE programmiert werden. Inklusive E-Book.
Il Battery Shield V1.3.0 per Wemos D1 mini permette sia di alimentare il modulo a batteria sia effettuare la sua carica quando è scarica.
Diagram and pinout for version v1.0.0 Pin Pin Function ESP-8266 Pin TX TXD TXD RX RXD RXD A0 Analog input, max 3.3V input A0 D0 IO GPIO16 D1 IO, SCL GPIO5 D2 IO, SDA GPIO4 D3 IO,10k Pull-up GPIO0 D4 IO, 10k pull-up, BUILTIN_LED GPIO2 D5 IO, SCK GPIO14 D6 IO, MISO GPIO12 D7 IO, pinout
I wanted a simple, rugged keychain case to carry around a Wemos D1 Mini board. So after a Saturday afternoon of playing in TinkerCAD and test printin
Wie du das IR Controller Shield am Wemos D1 Mini programmierst und dir eine Webseite erstellst, um Geräte zu steuern, zeige ich dir hier.
Wemos D1 Mini Temperature/humidity Monitoring: I was looking for cheap and easy way to monitor temperature and humidity for my cottage that will run as well on battery or on power socket. I needed to monitor temperature remotely but I wanted as well possibility for local visual temperature check…
Il WEMOS RGB LED shield è appositamente progettato per essere utilizzato con le schede Wemos D1 Mini e Mini Pro.
Adds some buttons to your ESP8266 board.
L'OLED 0.96 Shield prodotto da Wemos è un piccolo display OLED da 128x64 pixel con una dimensione di 0,49 pollici, si connette tramite I2C.
