Hi, I have flashed a sonoff basic with tasmota and set GPIO14 Sensor -> 09 Switch1. I use home assistant and wall shitches and everything works ok. I have connected all like in this picture. It is worked ok for two days and after that th...
In this project you'll learn how to use the ESP Easy firmware on a Sonoff basic smart switch and control it with Node-RED using Node-RED dashboard. The Node-RED software is running on a Raspberry Pi. The ESP Easy firmware can also be integrated with other home automation platforms like Home Assistant.
BLACKPINK Jennie “ddu du ddu du”
Table of contents Basic information Installation Configuration DS18B20 temperature sensor installation Data exchange / MQTT openHAB configuration Information about new versions and problems reporting Installing DS18B20 temperature sensor Required: DS18B20 sensor 4,7k resistor mounted between 3.3V and data line I’m suggesting not to install sensor inside the Sonoff switch case...
Sonoff WiFi Switch is a great and cheap IOT device. But the 5$ device can do a lot more. By adding I2C, you can connect a whole range of sensors.
IP-Steckdose basteln, Schaltplan mit Bauanleitung und Quellcode
@/lalalalisa_m Ddu du Ddu du outfit
BLACKPINK - ‘뚜두뚜두 (DDU-DU DDU-DU)’ M/V - Lisa
Blackpink without lisa
Ddu du ddu du
Sonora
